Top 10 MATLAB Projects For Electrical And Electronics Engineers

March 8, 2021October 26, 2022 CS Electrical And Electronics

Hello guys, welcome back to our blog. In this article, we will discuss the top 10 MATLAB projects for electrical and electronics engineers, and MATLAB Simulink projects for electrical and electronics engineers.

If you have any electrical, electronics, and computer science doubts, then ask questions. You can also catch me on Instagram – CS Electrical & Electronics.

Also, read the following:

MATLAB Projects For Electrical And Electronics Engineers

10. Battery Mathematical Modeling

This may be the best idea for your mini-project. By doing battery mathematical modeling, you will be able to analyze the working of the battery dynamically. You can do battery modeling on lithium-ion cells because they are used in EVs. Once you do mathematical modeling compare the results such as battery voltage, state of charge, and current with the generic model. If you want to go into the electric vehicle industry, then this will be a better option for you.

09. Electric Vehicle Design

This topic you can select for a major project. In this topic, you need to design an electric vehicle in MATLAB Simulink, this model will consist of a motor, power converters, battery packs, controller, etc. After doing modeling, you can check the speed, and torque of the vehicle.

08. Wind Turbine Plant Model

A wind turbine converts wind energy into electrical energy. You can design a control system for a wind turbine in MATLAB Simulink. After the simulation, you can analyze the model under various conditions.

07. Smart Grid Model

This will be a great idea for your capstone project. A smart grid means controlling the system automatically during unwanted conditions. You can build a smart grid model in MATLAB by adding electrical components such as a transformer, and different switchgear used in the grid. You should design the model in such as way that if any fault occurs, then it should handle itself.

06. Speed Control Of Induction Motor Using DTC Method

This gone be a great idea for the mathematical modeling of induction motors using the direct torque control method. This model will control the speed of the motor without disturbing motor parameters.

05. Different MPPT Algorithms In Solar Panel

MPPT stands for maximum power point tracker used along with the solar panel to optimize the gap between the solar panel and battery. You can design models on different MPPT algorithms and compare the results of all MPPT algorithms.

04. Bi-directional Converter Mathematical Modeling

Bi-directional is a two-way converter means power can flow in both directions. Nowadays, this type of converter will be used in electric vehicles because of regenerative braking.

03. Closed Loop Control Of BLDC Motor

BLDC is more popular in electric vehicles. You can do mathematical modeling of closed-loop control brushless dc motor using commutation logic or SVPWM. BLDC motor is used in electric vehicles because of its low maintenance cost.

02. Battery Management Using Passive Cell Balancing

Passive cell balancing means equalizing the voltage or state of charge of each cell by wasting energy through the resistor. In an electric vehicle, a passive cell balancing technic is used to balance all cells to avoid the blast or degrading of cells due to overcharging.

01. Battery Management Using Active Cell Balancing

Active cell balancing means equalizing the state of charge or voltage of each cell without wasting energy. BMS will also offer various operations like fault protection, cell level, pack level voltage, and states (SoP, SoC, SoH) measurement of pack level. This can also be a great idea for your project.

This was about the MATLAB Projects For Electrical And Electronics Engineers. I hope this article “MATLAB Projects For Electrical And Electronics Engineers” may help you all a lot. Thank you for reading.

Also, read: