Hello guys, welcome back to my blog. In this article, I will share 200+ electric vehicle projects for engineers, MTech, Ph.D., diploma students, electric vehicle project ideas, engineering projects on an electric vehicle, electrical vehicle projects, etc.
If you have any doubts related to electrical, electronics, and computer science, then ask questions. You can also catch me on Instagram – CS Electrical & Electronics And Chetan Shidling.
Also, read:
- 500+ Matlab Simulink Projects Ideas For Engineers, MTech, Diploma.
- Power Electronics Projects For Engineers, Diploma And MTech Students.
- Top 100 Capstone Project Ideas For Engineering Students In 2021.
Electric Vehicle Projects
01. Driving cycle development for electric vehicle simulation.
02. Closed-loop Electric Vehicle modeling in Matlab.
03. Energy analysis of EVs on different driving cycles.
04. Optimal selection of components of EV from vehicle simulation analysis.
05. Life analysis of the electric vehicles.
06. Electric motor performance analysis in EV for different driving cycles.
07. Electric Vehicle battery modeling in Matlab including self-discharge.
08. Performance improved battery modeling for EV simulation.
09. Electric battery life state of health model for EVs.
10. SVPWM speed control of PMSM.
11. Harmonic elimination in SVPWM inverter.
12. Low switching loss SVPWM inverter for Electric Vehicle.
13. Simulation model of induction motor and performance analysis for EV.
14. Efficiency map model for PMSM to use in EV simulation.
15. Efficiency map development for induction motor.
16. Performance analysis on induction motor Matlab model on standard driving cycles.
17. Vehicle control unit modeling for minimal loss operation.
18. Optimal selection of components for EV powertrain from EV simulation.
19. Control strategy to minimize EV energy consumption using ADVISOR.
20. Battery performance analysis incomplete vehicle model.
21. SOC of life of battery using complete vehicle model.
22. Electric scooter development.
23. Simulation model of Electric Scooter.
23. 0+ Electrical Vehicle Projects.
24. Performance analysis of electric scooter with different motors.
25. Component selection for an electric scooter from an open-loop vehicle model.
26. Charging time optimization from real-time electric scooter data.
27. Battery performance of electric scooter from field data.
28. Electric scooter energy consumption – field data analysis.
29. Stage-by-stage energy analysis on the open-loop electric vehicle model.
30. Component rating from open-loop EV model.
31. Vehicle performance on a different driving cycle using an open-loop vehicle model.
32. Energy consumption minimization techniques from open-loop vehicle model.
33. Sensitivity analysis of vehicle design parameters.
34. Critical factor of EV design and effects on energy consumption.
35. Factors for optimal vehicle design from open-loop simulation.
36. Effectiveness of regenerative braking on electric scooter: analysis and design.
37. Regenerative braking at low speed: effect on driver comfort simulation analysis.
38. Effect of regenerative braking on the life of the battery.
39. Development of an algorithm for efficient regenerative braking.
40. Supercapacitor integrated battery system for electric vehicles.
41. Design and simulation of regenerative braking using supercapacitor battery system.
42. Life and economic analysis of battery with a supercapacitor.
43. Efficiency improvement of regenerative braking using a supercapacitor.
44. Bidirectional converter for electric vehicle grid integration.
45. Load leveling algorithm for EV home charging.
46. Peak load shaving using an electric car.
47. Economical analysis of load-leveling using EV.
48. All-wheel drive electric car VCU development.
49. Power split algorithm for multi-axle electric cars for minimization of energy consumption.
50. Multi motor electric car: energy minimization algorithm.
51. Multi battery AWD electric vehicle control algorithm and energy calculation.
52. Power system stability analysis with a grid-connected electric car.
53. Vehicle to Home for minimization of electricity bill.
54. Algorithm development for electricity bill minimization using controlled charging.
55. Switching loss minimization in grid-connected EVs.
56. Prototype of a fast-charging station for an electric car.
57. Overcurrent protection for electric car charging stations.
58. Energy management for Vehicle to Grid integrated electric vehicle.
59. Automatic billing system for electric vehicle charging.
60. Peak demand management using electric vehicles.
61. Solar charging stations for an electric vehicle.
62. Harmonic reduction in electric vehicle charging stations.
63. Adaptive charging based on load tariff.
64. Efficient level 2 charging station for home.
65. Switching loss reduction in level 2 charging stations.
66. SVPWM inverter and modes of operation for switching loss minimization.
67. Multi-level inverter for an electric vehicle.
68. Bidirectional converter for regenerative braking.
69. Efficient regenerative braking using ultracapacitor.
70. Novel topology for electric vehicle inverter.
71. Thermal loss minimization in an EV inverter.
72. Regenerative braking with minimum switching loss.
73. Protection circuit for electric vehicle inverter.
74. Power factor improvement in inverter and performance analysis in EV model.
75. Simulation model of inverter strategies for different driving cycles.
76. DC-DC converter with low switching loss.
77. Intelligent dual operation of DC-DC converter (charger and converter).
78. Multilevel DC-DC converter.
79. Small DC-DC converter for EVs.
80. Analysis to find the best DC-DC converter for an electric vehicle.
81. Filter for DC-DC converters to charge low voltage EV battery.
82. Cooling system design for DC-DC converters.
83. DC-DC converter for solar-powered electric vehicles.
84. DC-DC converter for Vehicle to Vehicle charging.
85. Switching strategy for the minimal power loss in the DC-DC converter.
86. Optimal energy utilization of EV using VCU.
87. A control strategy to minimize energy loss in a passenger car.
88. Power split strategy using fuzzy control in a hybrid electric vehicle.
89. Reverse parking assistance system for an electric vehicle.
90. Charging station locator and battery monitoring for electric vehicles.
91. Vehicle control system for autonomous driving.
92. Vehicle control system for cruise control.
93. Thermal management of the vehicle.
94. Driver suggestion system collecting road data.
95. Anti-lock brake control.
96. State of charge estimation for an electric vehicle battery.
97. State of health estimation for an EV battery.
98. Strategies for the long life of electric car batteries.
99. Novel technique for cell balancing of an electric vehicle.
100. Protection circuits for an electric vehicle battery.
101. Thermal management to increase battery life.
102. Advanced and accurate state of charge estimation using filters.
103. Cell voltage measurement and cell balance in an electric vehicle.
104. Data analysis in BMS using cloud computing.
105. Ideal power minimization in BMS – develop BMS with low power consumption.
106. Energy-management system for a hybrid electric vehicle, using ultracapacitors and neural networks.
107. Plug-in hybrid electric vehicle charging infrastructure review.
108. Power-factor-corrected single-stage inductive charger for electric vehicle batteries.
109. Planning electric-drive vehicle charging under constrained grid conditions.
110. Comparing the benefits and impacts of hybrid electric vehicle options.
111. Discussion on Operation Modes to the Electric Vehicle Charging Station.
112. Plug-in hybrid electric vehicle market penetration scenarios.
113. Green move: An innovative electric vehicle-sharing system.
114. Romo-the robotic electric vehicle.
115. Regenerative braking for an electric vehicle using ultracapacitors and a buck-boost converter.
116. The simulation of vehicle-to-home systems using electric vehicle battery storage to smooth domestic electricity demand.
117. Exploring the formation of electric vehicle coalitions for vehicle-to-grid power regulation.
118. Lifecycle analysis comparison of a battery electric vehicle and a conventional gasoline vehicle.
119. Comparison of the environmental impact of 5 electric vehicle battery technologies using LCA.
120. FreedomCAR: electrical energy storage system abuse test manual for electric and hybrid electric vehicle applications.
121. Vehicle integrated PV: a clean and secure fuel for hybrid electric vehicles.
122. Evaluation of state-level US electric vehicle incentives.
123. Modeling and optimization for electric vehicle charging infrastructure.
124. Hardware-in-the-Loop simulation of a hybrid electric vehicle using Modelica/Dymola.
125. On the control of permanent-magnet synchronous motors in hybrid-electric vehicle applications.
126. IoT-based Smart Vehicle Automation and Control mutually Enhanced Safety, Security and Tracking System by Wireless Sensors Networks.
127. Optimal Control for Decentralized Platooning.
128. Model-Based Design, Development, and Control of an Underwater Vehicle.
129. Vision and Radar Sensor Fusion for Advanced Driver Assistance Systems.
130. Evaluation of Position Sensing Techniques for an Unmanned Aerial Vehicle.
131. Characterization of a 5GHz Modular Radio Frontend for WLAN Based on IEEE 802.11p.
132. Further Cost Reduction of Battery Manufacturing.
133. Low Power System Design for Emerging Pervasive Platform.
134. An Adaptive Eye Gaze Tracking System Without Calibration for Use in an Automobile.
135. Reducing Side-sweep Accidents with Vehicle-to-vehicle Communications.
136. Implementation, Validation, and Evaluation of an Esc System During a Side Impact using an Advanced Driving Simulator.
137. Acoustic Detection of Rear Approaching Vehicles for Cyclists.
138. The National Automatic Toll Collection System for The Republic Of Poland.
139. Racing Driver Model in Dymola Vehicle Dynamics Library (VDL): Steering Controller Design.
140. Robust Torque Control for Automated Gear Shifting in Heavy-Duty Vehicles.
141. Embedded Automobile Engine Locking System, Using GSM Technology.
142. Sensor Fusion for Enhanced Lane Departure Warning.
143. Testing Degradation in a Complex Vehicle Electrical System Using Hardware-in-the-loop.
144. Advanced Electric Vehicle Drive and Safety Improvement Techniques.
145. Ph.D. Studentship on the Development of a quantum magnetic imaging array for characterization of electric vehicle batteries.
146. The role of the built environment and user preferences in planning for the electric vehicle charging infrastructure.
147. AI Supported Electric Vehicle Safety Enhancement Techniques.
148. Next Generation Additive Manufacturing for 3D Power Electronics Packaging.
149. On-board Integrated Chargers and Battery Management Systems for Electrical Vehicles (EVs).
150. Novel Cathodes for Lithium-ion Batteries.
151. Ph.D. in Next-Generation Battery Characterization.
152. Holistic Design Optimisation of Power Electronic Converters.
153. Ph.D. Studentship – A novel artificial intelligent technique for the design of vehicle electrical systems.
154. Beyond Predictive Energy Management.
155. Automated Configuration of Simulation Parameters.
156. Intelligent approaches to improve the system reliability of advanced testing methods.
157. Understanding the influence of battery current ripple.
158. Development of Efficient Models of Frictionally Induced Vibrations for the Prediction of Automotive Brake Squeal.
159. Multimodal active perception for safe autonomous vehicles.
160. Automated generation and parameterization of physics-based propulsion system models.
161. The thermodynamic limits to IC engine efficiency.
162. Speed Synchronization of Multiple Motors.
163. Intelligent Cabin using RFID Technology.
164. Remotely Operated Underwater Vehicle.
165. Navigation System for the Visually Challenged.
166. Magnetic Levitation Assisted Vertical Axis Wind Turbine.
167. Self-Balancing Robot(Inverted Pendulum Principle).
168. Remote-controlled Multi-purpose Quadrotor.
169. Solar mobile charger with irradiance Indicator.
170. Fuzzy logic controlled industrial dehumidifier.
171. An Intelligent Traffic Control Using RFID.
172. On-Line Electric Vehicle.
173. Robotic Arm using Haptic Technology.
174. Mind-Controlled Robotic Arm.
175. Home Automation using Arduino Microcontroller.
176. Power Generation via Cardiac fitness.
177. Electric Vehicle Intelligent Control System.
178. Green EV: Renewable Energy Powered Electric Vehicle.
179. Solar PV-Powered SRM Drive for EVs with Flexible Energy Control Functions – 2016.
180. Optimal Energy Management in Interconnected Nanogrids.
181. Design of biped robot.
182. Mind-controlled lift assists for paralyzed people.
183. Design and fabrication of a portable electronic component extractor for ewaste-mobile phones
184. Continuous life cycle evaluation of Li-ion batteries used in hybrid.
185. Wireless charging of electric vehicles.
186. Design and development of EWaste PCB Component Separator and Segregator.
187. Design and development of a micro phasor measurement unit.
188. Quantification of Harmonic Injection in Power System using Non -Active Power Theory.
189. A solar-assisted electric vehicle with one converter for charging and motor driving.
190. Design and Implementation of an energy-efficient robust controller for an electric vehicle with In – Wheel motors.
191. Design and development of a humanoid robot.
192. Mind Controlled Stair Climbing Wheelchair with self-balancing seat.
193. An autonomous quad copter-based delivery system.
194. Rope less elevator system using linear induction motor.
195. Indoor navigation for visually impaired using visible light communication.
196. Portable life detection device.
197. Design and development of fault detection and prognosis system for three-phase induction motor drive system.
198. Modeling and analysis of high-speed Homopolar Inductor Alternator.
199. Setting up of solar power plant in three phases with a maximum capacity of 135 kW.
200. Development of position control of piezoelectric actuators and sensors.
201. Coordinated the project on a Real-time expert system associated with the thermal power plant.
202. Design and development of an Intelligent data monitoring and management system for a microgrid.
203. Power factor improvement in three-phase induction motor drive system.
204. Design and development of an intelligent, integrated, and cost-effective IoT-enabled tool for the planning of a hybrid power generation system using the local weather data and load pattern.
205. Design and implementation of solar PV system for the electrification of an isolated rural household.
206. Implementation of a fuzzy logic algorithm for detection, diagnosis, and forecasting of fault in a three-phase induction motor drive system.
207. Human Operated exoskeleton.
208. Electric Auto Rikshaw.
209. Power System optimization.
210. Design of motor for EV Drivetrain for e-Bus.
211. Techno commercial Evaluation of EV Drivetrain for Commercial Vehicles (Phase 2).
212. System Design (Phase 3)
213. Smart Designer- Intelligent tool to improve the sales estimation system.
214. Reduction of Stray Loss in an Induction Machine
215. Techno commercial Evaluation of EV Drivetrain for Commercial Vehicles (Phase 1).
216. A project on 2 wheeler and 3 wheelers electric powertrain.
217. Development of E Scooter.
218. Dual Mechanical Port-Based Electric Vehicle Power train.
219. Station heat rate evaluation for NTPS and LTPS.
220. Losses in Induction Machines(Phase 2).
221. Development of Detailed Project Report for Smart Grid implementation in Guwahati City.
222. Remote Triggered Lab in Electromechanical Energy Conversion.
223. Losses in Induction Machines (Phase 1).
224. Electrical Machines Virtual Lab.
225. Introduction to Hybrid and Electric Vehicles.
226. Metro Advertising Revenue Funded Electric Vehicle Charging Trial.
227. AGL Electric Vehicle Orchestration Trial.
228. Origin Energy Electric Vehicles Smart Charging Trial.
229. Jemena Dynamic Electric Vehicle Charging Trial.
230. Realizing Electric Vehicle-to-Grid Services.
231. Energy Freedom Solar Electric Vehicle Pilot.
232. National Ultrafast EV Charging Infrastructure Network.
233. Charge Together Phase 2.
234. Chargefox Electric Vehicle Charging Network Project.
235. SA Strategic Regional Electric Vehicle Adoption Program.
236. Monash University and Climate Works Low Carbon Study.
237. Active cell balancing using flyback transformer.
238. Passive cell balancing.
239. Speed control of BLDC motor using TAV controller.
These are the top +200 electric vehicle project ideas. I hope this article may help you all a lot. Thank you for reading.
Also, read:
- 10 Tips To Maintain Battery For Long Life, Battery Maintainance
- 10 Tips To Save Electricity Bills, Save Money By Saving Electricity
- 100 (AI) Artificial Intelligence Applications In The Automotive Industry
- 100 + Electrical Engineering Projects For Students, Engineers
- 100+ C Programming Projects With Source Code, Coding Projects Ideas
- 1000+ Control System Quiz, Top MCQ On Control System
- 1000+ Electrical Machines Quiz, Top MCQs On Electrical Machines
- 1000+ Electronics Projects For Engineers, Diploma, MTech Students
Tags: Electric Vehicle Projects, Electric Vehicle Projects, Electric Vehicle Projects, Electric Vehicle Projects, Electric Vehicle Projects, Electric Vehicle Projects, Electric Vehicle Projects, Electric Vehicle Projects, Electric Vehicle Projects, Electric Vehicle Projects, Electric Vehicle Projects, Electric Vehicle Projects, Electric Vehicle Projects, Electric Vehicle Projects.
About The Author
