Electric Drives Projects For Electrical Engineers
The motion, speed, and torque of electric motors are controlled by systems that electrical engineers design, develop, and put into use. For many electric motor types, including DC motors, induction motors, and permanent magnet synchronous motors, these initiatives frequently concentrate on developing effective and precise control systems. Electric drives are crucial parts of many different applications, such as robotics, electric vehicles, renewable energy systems, and industrial machines.
Project No: 01 Title: Enhanced Control and Power Management for a Renewable Energy-Based Water Pumping System
Project No: 02 Title: Current and Speed Sensor Fault Diagnosis Method Applied to Induction Motor Drive
Project No: 03 Title: Bidirectional Harmonic Current Control of Brushless Doubly Fed Motor Drive System Based on a Fractional Unidirectional Converter Under a Weak Grid
Project No: 04 Title: Control for Power Converter of Small-Scale Switched Reluctance Wind Power Generator
Project No: 05 Title: Analysis of Fractional Order Sliding Mode Control in a D-STATCOM Integrated Power Distribution System
Project No: 06 Title: An Effective Predictive Torque Control Scheme for PMSM Drive Without Involvement of Weighting Factors
Project No: 07 Title: An Islanding Detection Based on Droop Characteristics for Virtual Synchronous Generator
Project No: 08 Title: Real-Time Implementation of Extended Kalman Filter Observer with Improved Speed Estimation for Sensorless Control
Project No: 09 Title: Design and Analysis of Electrical Braking Torque Limit Trajectory for Regenerative Braking in Electric Vehicles with PMSM Drive Systems
Project No: 10 Title: Single-Stage Autonomous Solar Water Pumping System Using PMSM Drive
Project No: 11 Title: Sensorless Field-Oriented SMCC-Based Integral Sliding Mode for Solar PV-Based Induction Motor Drive for Water Pumping
Project No: 12 Title: An Enhanced Linear Active Disturbance Rejection Controller for High-Performance PMBLDCM Drive Considering Iron Loss
Project No: 13 Title: Development of Double Closed Loop Vector Control Using Model Predictive Control for Permanent Magnet Synchronous Motor
Project No: 14 Title: Hysteresis Controlled Quasi Z-Source Inverter Fed Induction Motor Drive System with Enhanced Response
Project No: 15 Title: An Approach Towards Extreme Fast Charging Station Power Delivery for Electric Vehicles with Partial Power Processing
Project No: 16 Title: Stator Resistance Estimation Using DC Injection with Reduced Torque Ripple in Induction Motor Sensorless Drives
Project No: 17 Title: Improved Non-Singular Fast Terminal Sliding Mode Control with Disturbance Observer for PMSM Drives
Project No: 18 Title: Peak Current Detection Starting Based Position Sensor Less Control of BLDC Motor Drive for PV Array Fed Irrigation Pump
Project No: 19 Title: Grid-Connected Induction Motor Using a Floating DC-Link Converter Under Unbalanced Voltage Sag
Project No: 20 Title: Improved Non-Singular Fast Terminal Sliding Mode Control with Disturbance Observer for PMSM Drives
Project No: 21 Title: Adaptive Hybrid Generalized Integrator Based SMO for Solar PV Array Fed Encoder Less PMSM Driven Water Pump
Project No: 22 Title: Solar Powered BLDC Motor for Water Pumping System
Project No: 23 Title: Direct Instantaneous Torque Control of the Switched Reluctance Motor for Electric Vehicles Applications Using Fuzzy Logic Control
Project No: 24 Title: Speed Control for SRM Drive System Based on Switching Variable Proportional Desaturation PI Regulator
Project No: 25 Title: An Improved Technique for Energy-Efficient Starting and Operating Control of Single Phase Induction Motors
Project No: 26 Title: Sensorless Control for Five-Phase IPMSM Drives by Injecting HF Square-Wave Voltage Signal into Third Harmonic Space
Project No: 27 Title: Adaptive Sliding-Mode-Based Speed Control in Finite Control Set Model Predictive Torque Control for Induction Motors
Project No: 28 Title: Integrated AC to AC Converters for Single-Phase Input to Two-Phase Output Motor Drives
Project No: 29 Title: Emulation of Wind Turbine System Using Vector-Controlled Induction Motor Drive
Project No: 30 Title: Sliding Mode Predictive Current Control of Permanent Magnet Synchronous Motor with Cascaded Variable Rate Sliding Mode Speed Controller
Project No: 31 Title: Passivity-Based Model Predictive Control of Three-Level Inverter-Fed Induction Motor
Project No: 32 Title: Sensorless Predictive Control of PMSM EV Drive Using DSOGI-FLL Based Sliding Mode Observer
Project No: 33 Title: A Novel DC-Link Voltage Feedback Active Damping Control Method for IPMSM Drives with Small DC-Link Capacitors
Project No: 34 Title: Combined Speed and Current Terminal Sliding Mode Control with Nonlinear Disturbance Observer for PMSM Drive
Project No: 35 Title: Sensorless Predictive Control of SPMSM Driven Light EV Drive Using Modified Speed Adaptive Super Twisting Sliding Mode Observer with MAF-PLL
Project No: 36 Title: Protection of Three-Phase Induction Motor Using Embedded System
Project No: 37 Title: High-Performance Reluctance Synchronous Motor Drive Using Field-Oriented Control
Project No: 38 Title: Modelling and Simulation of Switched Reluctance Generator for Aircraft Power Systems
Project No: 39 Title: An Adaptive Identification of Rotor Time Constant for Speed-Sensorless Induction Motor Drives: A Case Study for Six-Phase Induction Machine
Project No: 40 Title: Enhanced Control and Power Management for a Renewable Energy-Based Water Pumping System
Project No: 41 Title: Model Predictive Direct Power Control of Doubly Fed Induction Generators Under Balanced and Unbalanced Network Conditions
Contact us on WhatsApp to get a Quotation for Electric Drives Projects.
About The Author
