Electrical Safety Measure To Follow In Industry, Engineer Safety In Industry

Hello guys, welcome back to my blog. In this article, I will discuss electrical safety measure to follow in the industry, engineers’ safety measures in the industry, steps to follow to ensure safety in the industry, etc.

If you have any doubts related to electrical, electronics, and computer science, then ask question. You can also catch me @ Instagram – Chetan Shidling.

Also, read:

Electrical Safety Measure To Follow In Industry

Safety is the most important aspect of any industry. The worker’s and employees’ safety should be the first priority before entering the Industrial Plant. Electrical Industries are very dangerous for loss of life if the right precautions are not taken. Electrocution is the major cause of death in Electrical Industries. Electric Fires, Electric Burn & Electric Shock are causes for the Electrical accidents.

Causes Of Electric Accident:

01. Damaged cables & open wiring: The cords get damaged with a time of all electrical appliances, exposing the wires inside. The rubber upon the copper wire gets melted or break if proper care is not taken, which could be the cause for fire or spark. The broken sockets or the weak earthing wire can cause a short circuit in electrical appliances.

02. Wrong cabling & wiring: Faulty wiring or split wires can cause shock and injuries to any person working in the industry. The Electrical wiring should follow the proper sequence and must have proper current handling capability. Overloading many appliances on the same line can cause a high voltage spark.

03. Liquid spillage & moisture: All the electrical connections should be kept away from water and enclosed in the metal enclosure. The appliance near to water should be installed by a professional electrician. The water leakage can cause an electric shock to pass in a large amount.

Important precautions need to take while working in any Industry:-

Wear proper uniform with helmet and don’t wear loose thing, which can cause accidents. So, it is necessary to wear proper shoes and kit.
Please stay away from Highly flammable Substances and keep electrical items away from them.
When working with Electrical Systems, It is compulsory to wear gloves and a safety helmet.
Stay away from capacitors, Since they are charged it might lead to electric shock.
Do not touch any electrical conductor, electrical wires, belts, roller, and mechanical moving machines. Shut off the power and then only work on it.
Keep every Electrical system clean and dust-free, Don’t allow moisture to enter any electrical system. This might lead to the failure of components.
In Electrical Safety it is always said to work with one hand, which prevents current to pass from the chest cavity.
Everyone should avoid metal watches, rings, and any conductive metal things. This might result in too heavy a shock.
Stay away from energized electrical circuits and live.
Disconnect the Electrical Power supply while installing and servicing electrical machines.

Electrical signs to follow in Industry:-

Engineers and workers must follow these signs at the workplace. Each sign is the caution near the hazard places. A sign such as High voltage means a person should stay away from that place as it is charged with high voltage in KVs. There is a certain hazardous place where entry is restricted because of harmful gases and chemicals.

Following this sign helps in the reduction of accidents and saves the life of human beings. Every industry follows safety protocols and has its own safety precaution according to its operation.

I hope this article “Electrical Safety Measure” may help you a lot. Thank you for reading.

Also, read:

About The Author

Raj Rana

Content Writer

See author's posts

Share Now